445nm 1000mw Gold Module Laser DI Messa A Fuoco Blue Laser Incisione Laser Testa 1W Tubo
445nm-1000mw Gold Module Laser DI Messa A Fuoco Blue Laser Incisione Laser Testa, 1W Tubo Del Laser Diode 2p Port
Saws excellent. With regard to inaccurate work. I tried the board, plywood in addition to plastic. Delivery was ed completely.
the parcel located the Bryansk region rapidly, we will try, we will realize only how to install the drives... for the correct file in the tree...
the parcel came on time everything is in purchase!!! I recommend the seller
In general, a superb disk has some minor mistakes on the teeth, but doesn't affect the work. It works its function, saws, testing is convenient to do. Before Leningrad region It came in 14 days.
very satisfied. regarding such a disk looked at Youtube . com. looks very high quality. carbide teeth sharp.
you need to work with a disk with gloves, protection in addition to install a pen, since Bulgarian pretty pulls a compact disk. Be carefull. sawing rapidly
445nm-1000mw Gold Module Laser DI Messa A Fuoco Blue Laser Incisione Laser Testa, 1W Tubo Del Laser Diode 2p Port
This 445nm 1000mW focusable blue laser module is equipped with constant-current driver board, aircraft
aluminum heat sink and cooling fan ideal for DIY laser cutter equipment usage with stable out put power and
long lifetime.
User must read:
1. Laser module power is relatively large, only for industrial use, to prohibit the exposure of the eye, otherwise it will
cause permanent blindness, the consequences at your own risk.
2. Do not use in flammable and gas atmospheres to avoid fire and explosion
3. Prohibit children from exposure to this laser product.
4. Do not open the module to avoid damage.
-Can notprocessed metals, glass, stone, ceramics, jewelry, silver, reflective material, translucent material.
-Carving wood / bamboo / paper / plastic / leather / rubber / horn.
-Can cut paper-thin / light wood / sponge paper / felt / fabric / sticker.
--Laser wavelength: 445nm (blue viole)
--Spot type: Dotted (adjustable)
--Light power: 1Watts (1000mw)
--Drive mode: external ACC constant current drive
--Cooling method: Forced Air Cooling
--Operating voltage: 12V DC
--Power supply interface: 2 * 2.54
--Control interface: 2 * 2.54 (TTL control switch, PWM control power)
--Shell material: Aluminum, Surface Anodized
--Module material: Copper
FAQ:
Q : How To Focus The Laser ?
Q：Where is the TTL port? I can only see the PWM?
A：TTL and PWM is compatible and you can only choose one of them. It means that you can connect this module\'s PWM port
to the PWM (or TTL) port on the control board of your engraver. But make sure the voltage supply of that port is DC 5V.
Q：How can I connect this module to the my engraver?
A:If you don\'t need the PWM function, you can directly connect the power port to Motor Port (12V, GND) on your control
board and leave the PWM port unconnected.
User must read:
--Laser module power is relatively large, only for industrial use, to prohibit the exposure of the
eye, otherwise it will cause permanent blindness, the consequences at your own risk.
--Do not use in flammable and gas atmospheres to avoid fire and explosion.
--Prohibit children from exposure to this laser product.
--Do not open the module to avoid damage.
Comments
Post a Comment