16Pcs Diamond Coated Dril Set Saw Blade 6mm 50mm Glass Marble Tile Granite Hole Drill Bits

16Pcs Diamond Coated Dril Set Saw Blade 6mm-50mm Glass Marble Tile Granite Hole Drill Bits thin ceramic tile cutter For Glass

Everything is nicely perfectly sawed and meets on a standard grinder. It came quickly.
The product corresponds to the description, came quickly in 16 days, has been tracked, packaged perfectly in the postal bag, a vial and factory carton. The disc is of excellent top quality, fully corresponds to the photography of the seller, there are no comments. Product happy, thanks seller and five superstars.
Norm Delivery within a month. Packaging... well, so-so... but there is nothing to break, so it will happen down.
drive a good very little size small I will think about ordering a large disk to get 230 mm
Checked cutting great!!!! Satisfied! I recommend the farm is useful.
Thank you vendor for your promptness. packed with quality. I haven't tried it

Finishing: Other

Number of Pcs: 21-50 Pcs

Blade Type: Circular Saw Blades

Model Number: Diamond Coat Hole Saw Blade

Size: 6mm/0.23", 8mm/0.31", 10mm/0.39"

Blade Material: Other

Usage: Home DIY

Diamond Coated Core Hole: Saw Drill Bit Set Tools

Application: for Tiles Marble Glass Ceramic

16Pcs drill sets: Diamond Coated Drill Bit sets

Saw Drilling Bits : For Power Tools 6mm-50mm

 

 

 

No fit for tempered glass and high hardness tiles.

16pc 6mm-50mm Diamond Coated Hole Saw Drill Bit Glass thin Ceramic Tile Cutter

 

Feature：

1.Excellent for making clean and accurate hole on glass, tile， thin ceramic ，wood or other.

2.Size：16Pcs Diamond Coated Core Hole Saw Glass Drill Bit Set，Size: 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 14mm/0.55", 16mm/0.62", 18mm/0.7", 20mm/0.78", 22mm/0.86", 30mm/1.17".

3.Works well with a common electric drill，Bench drill.

4.Nickel plating surface and decrease the resistance of cutting；Large cut-out for better scrap ejectment.

5.Note：Angle drill at 45 degree to start hole at low speed，then vertical position once the hole has started.

 

Specifications:

1.Size：Hole Diameter: 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm 22mm 25mm 28mm  30mm 35mm 40mm 45mm 50mm

2.Weight：310g

 

Usage：

1. Clean the surface and keep it wet with water& coolant.Then mark down the position of the drill hole.

2. Start drilling with a 45 degrees angle to the surface slowly.

3. Drill at low speed and adjust the drilling angle to vertical position when the hole appears.

4. Slown down to drill the hole off directly or you can exit and drill from the other side to make it smoothly.

 

Package included:

1 x 16pcs Diamond tool drill bit hole saw set