NEW 445nm 5500mw Gold Module Laser DI Messa A Fuoco Blue Laser Incisione Laser Testa 5
NEW 445nm-5500mw Gold Module Laser DI Messa A Fuoco Blue Laser Incisione Laser Testa 5.5W Tubo Del Laser
hello, a bad you've got loose the shaft that may be put in the drill, do not the actual rivet and to enter the rivet q q apply power and to remove the surplus rivet q disarm it. I'd like a solution to the problem of the riveter.
Delivering in the right purchase, just what I needed, I just needed to wait longer for supply (50 days), I'm looking forward to the next purchase
Item successfully delivered! I'm satisfied with client services!! This is a good product!! Seeing that described!!! To seller cheers!
Very good. Only the offer was broken. The box and things in the box ended up out. Most of it is discovered and still there. The transporter was not Frank Martin! He's always very precies regarding his load!
The packaging of the case sustained during transportation, the package seems to have been dropped, though the containers are safe and seem, I am satisfied with the purchase I recommend the seller!
Good merchandise, but improvements required. Hardly штивт dowel, had cleaner underlay and then everything has gone to great success. Apologies video can not attach with all the work of this device, complete see how it works.
NEW 445nm-5500mw Gold Module Laser DI Messa A Fuoco Blue Laser Incisione Laser Testa 5.5W Tubo Del Laser
This 445nm 5500mW focusable blue laser module is equipped with constant-current driver board, aircraft aluminum heat
sink and cooling fan ideal for DIY laser cutter equipment usage with stable out put power and long lifetime.
User must read:
1. Laser module power is relatively large, only for industrial use, to prohibit the exposure of the eye, otherwise it will
cause permanent blindness, the consequences at your own risk.
2. Do not use in flammable and gas atmospheres to avoid fire and explosion
3. Prohibit children from exposure to this laser product.
4. Do not open the module to avoid damage.
-Can notprocessed metals, glass, stone, ceramics, jewelry, silver, reflective material, translucent material.
-Carving wood / bamboo / paper / plastic / leather / rubber / horn.
-Can cut paper-thin / light wood / sponge paper / felt / fabric / sticker.
--Laser wavelength: 445nm (blue viole)
--Spot type: Dotted (adjustable)
--Light power: 5.5Watts (5500mw)
--Drive mode: external ACC constant current drive
--Cooling method: Forced Air Cooling
--Operating voltage: 12V DC
--Power supply interface: 2 * 2.54
--Control interface: 2 * 2.54 (TTL control switch, PWM control power)
--Shell material: Aluminum, Surface Anodized
--Module material: Copper
--Life Time:8,000hours
--Working temperature:-40-75Celsius
FAQ:
Q : How To Focus The Laser ?
Q：Where is the TTL port? I can only see the PWM?
A：TTL and PWM is compatible and you can only choose one of them. It means that you can connect this module\'s PWM port
to the PWM (or TTL) port on the control board of your engraver. But make sure the voltage supply of that port is DC 5V.
Q：How can I connect this module to the my engraver?
A:If you don\'t need the PWM function, you can directly connect the power port to Motor Port (12V, GND) on your control
board and leave the PWM port unconnected.
User must read:
--Laser module power is relatively large, only for industrial use, to prohibit the exposure of the
eye, otherwise it will cause permanent blindness, the consequences at your own risk.
--Do not use in flammable and gas atmospheres to avoid fire and explosion.
--Prohibit children from exposure to this laser product.
--Do not open the module to avoid damage.
Comments
Post a Comment